LvSwitch IPPBX 3000 Manual
86
Enable Encryption
Select to enable encryption or not.Default value no
Send the beat fork message
Select “yes”,to send the beat fork message to the
opposite;no,not send. Default “no”
DTMF
Set the sending mode of DTMF signal, the options are
rfc2833, inband, info.The default is rfc2833
User=phone
When the URI scheme is SIP, this parameter
determines the form of the user name, with the
default value "no".
Select "yes" and the user name is in the form
phone@host, such as
Sip: [email protected]
sip / 2.0 User =
phone.
Select "no", the user name is in the form of
user@host, such as:
[email protected]
Fax mode
None t.30 by pass or T.38
Enable RFC3681
Default value “yes”
Enable Routing Mode
Default value “yes”
Enable Authentication
Default value “yes”
Pattern Matching
Default value “yes”
2.
Codec
Click <Add> button to open the page as shown in the following figure.
Summary of Contents for IPPBX3000
