Instruction Manual MC6000
6-11
CTRL Menu Structure
CTRL Menu selected.
Press the start/enter key to change to password prompt.
Press the start/enter key to initiate password changes.
Enter the password with the arrow keys (factory setting
= 465). This has to be entered every time after a mains supply reset.
Press the start/enter key to confirm the password
(control terminals are blocked automatically).
Press the start/enter key to start reference value input.
The last digit flashes. It can be changed with the
▲
key. Pressing
the
▼
key moves to the next position.
The fifth position on the extreme left is reserved for the direction
of rotation (—) = counterclockwise
and ( ) = clockwise.
The exponential can be entered as the last digit.
Pressing the start/enter key starts the controller and the motor
is run up to the reference value.
Motor operated potentiometer (MOP) function using K
EY
P
AD
:
press
▲
key to increase reference value online
press
▼
key to reduce reference value online
The ramp symbol flickers to indicate that the value is being
changed.
Pressing the stop/return key once causes the motor to continue running with a constant reference
value. A new reference value can be entered. Pressing the start/enter key again causes the
Servocontroller to use the new reference value.
Pressing the stop/return key twice stops the motor.
Note:
Online means that the motor output will follow the reference value change immediately. The
reference value changes initially in small increments which gradually increase if one of the
arrow keys is held down. Small increments (with smallest increments, speed = 1/655 RPM,
programmable with CTLFA (_KPAD)) are sometimes not visible on the display, but the ramp
symbol flickers to represent the changing value.
s t a r t
e n t e r
s t o p
r e t u r n
s t a r t
e n t e r
s t a r t
e n t e r
0...9
s t a r t
e n t e r
s t o p
r e t u r n
0...9
CTRL
CTRL
CTRL
CTRL
CTRL
CTRL
s t o p
r e t u r n
s t o p
r e t u r n
s t a r t
e n t e r
CTRL
s t a r t
e n t e r
