Installation
2-12
Issue 1 January 1997
2.
Select [x] Set Accounting Period.
In a minimal setup, select OK and proceed
to step 3.
Skip in a minimal setup
a. Make any required changes from
PART
II of the SYSTEM-WIDE PARAMETERS
worksheet.
b. Select OK to continue.
3.
Select [x] Call Collection Interface.
a.
Load the Call Collection diskettes, one at a time:
i.
Use Add then select Yes to continue.
ii.
Load Disk 1 and select OK.
iii. Repeat i and ii above with Disk 2.
b.
Back at the Call Collection Interface dialog box, click on the down arrow of the
selection box to select the protocol (as identified in the CALL COLLECTION
INTERFACE worksheet) and do the same for the format (the MERLIN LEGEND
entry).
c.
Select the Options button in the Protocol group to set transmission details.
When a dialog box similar to one of the samples shown on the next page
appears, enter the appropriate values from the
CALL COLLECTION INTERFACE
worksheet.
