Lucent Technologies MERLIN LEGEND Reporter Installation And Use Manual Download

Page: 31 / 159

Installation

Issue 1 January 1997

2-13

If you selected Direct Connect, a dialog
box similar to this one appears.

When complete, select OK and
proceed to step 3e.

If you selected Collect from File, a dialog
box similar to this one appears.

When complete, select OK and proceed to
step 3e.

If you selected
PollComm, a dialog box
similar to this one
appears.

When complete, select
OK and proceed to step
3d.

If you selected PollComm protocol:

Use the Schedule button in the Call
Collection Interface dialog box to add
the polling schedule.

ii.

Use Add and complete the resulting
dialog box with values from the

CALL

COLLECTION - POLLING SCHEDULE

worksheet.

iii. When complete, select OK.

Back on the Call Collection Interface dialog box, select Apply and then Yes to
restart Call Collection Interface tasks. Use Close to continue the setup.

Summary of Contents for MERLIN LEGEND Reporter
































































































































































Search results

Summary of Contents for MERLIN LEGEND Reporter

Reviews:

Related manuals for MERLIN LEGEND Reporter

Brands by name

Popular brands

Lucent Technologies MERLIN LEGEND Reporter, Installation And Use Manual

Search results

Summary of Contents for MERLIN LEGEND Reporter

Reviews:

Related manuals for MERLIN LEGEND Reporter

Brands by name

Popular brands