Installation
2-10
Issue 1 January 1997
Make a note of the IRQs used for the MERLIN LEGEND Reporter (typically COM
ports 1 and 2). Some potential conflicts include: COM ports 3 and 4 may share IRQs
with COM ports 1 and 2, or a serial mouse may share an IRQ with COM port 1 or 2.
(typically IRQs 3 and 4) cannot be used by any other function.
Some Network Interface cards (NIC) are not detected by MSD. In many cases, an
NIC is assigned to IRQs above 5, while COM ports are often assigned IRQs 3 and 4
(that is, no conflict). However, if an NIC is present and you cannot gather call
records, it may be necessary to determine which IRQ the NIC uses.
Loading MERLIN LEGEND Reporter Software
1.
Retrieve the MERLIN LEGEND Reporter software diskettes from the software
package and insert the Setup diskette in any disk drive.
2.
Select Run from the Program Manager File menu; at the command line, enter the
drive letter followed by “:setup” (for example, a:setup for the A drive).
3.
When a dialog box similar to the one below appears, select OK. (Follow screen
instructions if you wish to use a different directory.)
4.
As the installation progresses, follow the screen prompts to load the Program 1,
Program 2, and Configuration diskettes into the named drive.
5.
When a dialog box similar to the one at the top of the next page appears, select OK
(follow screen instructions if the start-up drive is other than “c:”).
6.
When a dialog box similar to the one below appears, remove the last diskette from
the drive, then select
Yes
.
