Installation
Issue 1 January 1997
2-11
After the PC reboots, proceed to Setting Up MERLIN LEGEND Reporter.
Setting Up MERLIN LEGEND Reporter
After Windows restarts, the Lucent Technologies logo appears on the screen followed by
the MERLIN LEGEND Reporter setup dialog box:
In this procedure, when you select [x] an item
from the setup display, the item's dialog box
appears.
When you close the item's dialog box, the
setup display reappears so that you may
continue to the next item.
Skip in a minimal setup
1.
Select [x] Organization Level Names.
a. Enter your company
name and make any
required changes to the
Level Names from PART
I of the SYSTEM-WIDE
PARAMETERS
worksheet.
b. When complete, select
OK to continue.
Changes to any of the level names on this screen changes all screen
banners and labels on all corresponding screens (see step 5). If you are
using MERLIN LEGEND Reporter for calling groups only, you may want to
change Cost Center to Calling Group.
