Installation
2-14
Issue 1 January 1997
4.
Select [x] Trunk.
In a minimal setup, select Close and
proceed directly to step 6.
Skip in a minimal setup
a. Use the Facilities
button, then Add to
enter one at a time,
every facility name,
grade of service, and
number of lines from
the
LINES & FACILITIES
worksheet (after each
entry, select Apply).
b. When complete, use
Close.
c. Back at the Line dialog box:
i.
Use Add to enter lines from the
LINES
& FACILITIES
worksheet and associate
them with the appropriate facility.
ii.
After each addition, select Apply.
iii.
When complete, select Close to
continue.
5.
Select [x] Organization.
This procedure uses default Organization Level Names. If you changed these
in step 1, your system shows the appropriate names. For example, if you
changed “Cost Center” to “Calling Group,” in step 1 you would see the labels
“Calling Group” instead of “Cost Center” at the bottom of this screen and all
subsequent screens and reports.
