LS ELECTRIC LSLV-S100 Series, User Manual, Page: 94 / 270

85
Learning to Perform Basic Operations
3.3
Actual Application Examples
Acceleration Time Configuration (0.4-22kW models only)
The following is an example demonstrating how to modify the ACC (Acceleration time) code
value (from 5.0 to 16.0) from the Operation group.
Step Instruction Keypad Display
1
Ensure that the first code of the Operation group is selected,
and code 0.00 (Command Frequency) is displayed.
2
Press the [ ▲ ] key.
The display will change to the second code in the Operation
group, the ACC (Acceleration Time) code.
3
Press the [ENT] key.
The number ‘5.0’ will be displayed, with ‘0’ flashing. This
indicates that the current acceleration time is set to 5.0
seconds. The flashing value is ready to be modified by using
the keypad.
4
Press the [ ◀ ] key to change the first place value.
‘
5’ will be flashing now. This indicates the flashing value, ‘5’ is
ready to be modified.
5
Press the [ ▲ ] key to change the number ‘ 5 ’ into ‘ 6 ’ , the first
place value of the target number
’
16.
’
6
Press the [ ◀ ] key to move to the 10s, place value.
The number in the 10s position, ‘0’ in ‘06’ will start to flash
7
Press the [ ▲ ] key to change the number from ‘ 0 ’ to ‘ 1 ’ , to
match the 10s place value of the target number ’ 16, ’ and then
press the [ENT] key.
Both digits will flash on the display.
8
Press the [ENT] key once again to save changes.
‘
ACC’ will be displayed. The change to the acceleration time
setup has been completed.
0.00
acc
5.)
%.0
^.0
)6.0
!^,)
acc