LS ELECTRIC LSLV-S100 Series, User Manual, Page: 74 / 270

65
Learning to Perform Basic Operations
Operation Keys
3.1.4.1
0.4-22kW Models
Install a separate emergency stop switch in the circuit. The [STOP/RESET] key on the keypad
works only when the inverter has been configured to accept an input from the keypad.
The following table lists the names and functions of the keypad’s operation keys.
Key Name Description
[RUN] key Used to run the inverter (inputs a RUN command).
[STOP/RESET]
key STOP: stops the inverter.
RESET: resets the inverter following fault or failure condition.
,
[
▲ ] key, [ ▼ ] key
Switch between codes, or to increase or decrease
parameter values.
,
[
◀
] key, [
▶
] key
Switch between groups, or to move the cursor during
parameter setup or modification.
[ENT] key
Used to select, confirm, or save a parameter value.
[ESC] key
A multi-function key used to configure different functions, such
as:
•
Jog operation
• Remote/Local mode switching
•
Cancellation of an input during parameter setup