LS ELECTRIC LSLV-S100 Series, User Manual, Page: 54 / 270

Installing the Inverter
45
Function Label Name Description
power source
A1/C1/B1
Fault signal
output
Sends out alarm signals when the inverter’s
safety features are activated (AC 250V <1A, DC
30V < 1A).
•
Fault condition: A1 and C1 contacts are
connected (B1 and C1 open connection)
• Normal operation: B1 and C1 contacts are
connected (A1 and C1 open connection)
A2, C2
Multi-functional
relay output
terminal
The signal is generated while operating. Define
and use the multi-functional relay output
terminal (Less than AC250 V 5A, Less than
DC30 V 5A).
Communication S+/S-/SG
RS-485 signal
line
Used to send or receive RS-485 signals.
NC NC Not in use.
Preinsulated Crimp Terminal Connectors (Bootlace Ferrule) .
Use preinsulated crimp terminal connectors to increase reliability of the control terminal
wiring. Refer to the specifications below to determine the crimp terminals to fit various cable
sizes.
P/N
Cable Spec. Dimensions (inches/mm)
Manufacturer
AWG mm 2 L* P d1 D
CE002506
26 0.25
10.4 6.0
1.1 2.5
JEONO
(Jeono Electric,
http://www.jeono.com/ )
CE002508 12.4 8.0
CE005006 22 0.50 12.0 6.0 1.3 3.2
CE007506 20 0.75 12.0 6.0 1.5 3.4
* If the length (L) of the crimp terminals exceeds 0.5” (12.7mm) after wiring, the control
terminal cover may not close fully.