LS ELECTRIC LSLV-S100 Series, User Manual, Page: 112 / 270

Table of Functions
103
4
Table of Functions
This chapter lists all the function settings for S100 series inverter. Set the parameters
required according to the following references. If a set value input is out of range, the
following messages will be displayed on the keyboard. In these cases, the inverter will not
operate with the [ENT] key.
•
Set value not allocated: rd
• Set value repetition (multi-function input, PID reference, PID feedback related): OL
•
Set value not allowed (select value, V2, I2): no
4.1
Operation Group
The Operation group is used only in the basic keypad mode. It will not be displayed on an
LCD loader.
SL : Sensorless vector control (dr.09) , I – IM Sensorless, P – PM Sensorless
* O/X : Write-enabled during operation, 7/L/A : Keypad/LCD keypad/Common
Code
Comm.
Address
Name
Keypad
Display
Setting Range
Initial
Value
Property* V/F SL
0h1F00
Target
frequency
0.00
0-Maximum
frequency(Hz)
0.00 O/7 O I/P
-
0h1F01
Acceleration
time
ACC 0.0-600.0(s) 20.0 O/7 O I/P
-
0h1F02
Deceleration
time
dEC 0.0-600.0(s) 30.0 O/7 O I/P
-
0h1F03
Command
source
drv
0 Keypad
1:
Fx/Rx-1
X/7 O I/P
1 Fx/Rx-1
2 Fx/Rx-2
3 Int 485
4
Field Bus
1
-
0h1F04
Frequency
reference
source
Frq
0 Keypad-1
0:
Keypad
-
1
X/7 O I/P
1 Keypad-2
2 V1
4 V2
5 I2
6 Int 485
8 Field Bus
12 Pulse
-
0h1F05 Multi-step St1 0.00-Maximum 10.00 O/7 O I/P
1
Table of options are provided separately in the option manual.