Lowenstein Medical elisa 300 Instructions For Use Manual Download Page 254

Page: 254 / 457

A 3 | Functions

Instructions for Use elisa 300-500 | Supplement A |

SW 2.09.x

| Rev. 11

the static control mode needs to be selected and set.

For safety and to prevent that elisa is switched off inadvertently while the

Cuffscout function is active, the Standby mode is indicated in large letters and a

warning is displayed stating that the cuff pressure is activated.

Another standby view is available which displays the cuff pressure as a live graph.

Remark

The Cuffscout needs to be deactivated before you can switch off

the ventilator.

Remark

This function is only available for the user

if enabled on the config

uration level and preset for the standby view.

When this view is selected, the Cuffscout graph is also displayed on the night

screen (see chapter “7.4.5.2 Display brightness” in the Basic Instructions for Use).

Summary of Contents for elisa 300










































































































































































































































































































































































































































































Search results

Summary of Contents for elisa 300

Reviews:

Lowenstein Medical elisa 300, Instructions For Use Manual, Page: 254 / 457

Search results

Summary of Contents for elisa 300

Reviews: