65
WWW.LCMETER.COM
LCI40
Series IOM
6 oPeration
No.
Function
Settings / Descriptions
C6.6 Special Functions
C6.6.8
GDC IR Interface
After this function has been activated an optical GDC adapter can be connected to the LC
display. After 60 seconds pass without a connection being established or after the adapter
is removed, the function is exited and the optical keys are active again.
Select:
Break (exit function without connection) /
Activate (the IR interface adapter and interrupt the optical keys)
After 60 seconds pass without a connection being established, the function is exited and
the optical keys are active again.
C6.7 Units
C6.7
Units
C6.7.1
Volume Flow
m³/h; m³/min; m³/s; L/h; L/min; L/s (L = litres); IG/s; IG/min; IG/h cf/h; cf/min; cf/s; gal/h;
gal/min; gal/s; barrel/h; barrel/day
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.2
Text Free Unit
For text to be specified refer to Set free units on page 87:
C6.7.3
[m³/s]*Factor
Specification of the conversion factor, based on m³/s:
xxx.xxx refer to Set free units on page 87
C6.7.4
Mass Flow
kg/s; kg/min; kg/h; t/min; t/h; g/s; g/min; g/h; lb/s; lb/min; lb/h; ST/min; ST/h (ST = Short
Ton); LT/h (LT = Long Ton);
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.5
Text Free Unit
For text to be specified refer to Set free units on page 87:
C6.7.6
[kg/s]*Factor
Specification of the conversion factor, based on kg/s:
xxx.xxx refer to Set free units on page 87
C6.7.7
Velocity
m/s; ft/s
C6.7.9
Temperature
°C; °F; K
C6.7.10
Volume
m³; L; hL; mL; gal; IG; in³; cf; yd³; barrel
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.11
Text Free Unit
For text to be specified refer to Set free units on page 87:
C6.7.12
[m³]*Factor
Specification of the conversion factor, based on m³:
xxx.xxx refer to Set free units on page 87
C6.7.13
Mass
kg; t; mg; g; lb; ST; LT; oz;
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.14
Text Free Unit
For text to be specified refer to Set free units on page 87:
C6.7.15
[kg]*Factor
Specification of the conversion factor, based on kg:
xxx.xxx refer to Set free units on page 87
C6.7.16
Density
kg/L; kg/m³; lb/cf; lb/gal; SG
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.17
Text Free Unit
For text to be specified refer to Set free units on page 87:
C6.7.18
[kg/m³]*Factor
Specification of the conversion factor, based on kg/m³:
xxx.xxx refer to Set free units on page 87
C6.7.19
Pressure
Pa; kPa; bar; mbar; psi (no free units possible);only if current input available
6.4 Function tables
6.4.3 Menu C, Setup, continued
