Linksys RVL200 Page 92 User Manual Download

Page: 92 / 174

Appendix A: Troubleshooting
Common Problems and Solutions

4-Port SSL/IPSec VPN Router

2. I want to test my Internet connection.

A. Check your TCP/IP settings.

For Windows 98 and Millennium:

Refer to Windows Help for details. Make sure

Obtain IP address automatically

is selected in the settings.

For Windows 2000:

1. Click

Start

Settings

, and

Control Panel

. Double-click

Network and Dial-Up Connections

2. Right-click the

Local Area Connection

that is associated with the Ethernet adapter you are using,

and select the

Properties

option.

3. In the

Components checked are used by this connection

box, highlight

Internet Protocol (TCP/IP)

and click the

Properties

button. Make sure that

Obtain an IP address automatically

and

Obtain

DNS server address automatically

are selected.

4. Click the

button in the

Internet Protocol (TCP/IP) Properties

window, and click the

button in the

Local Area Connection Properties

window.

5. Restart the computer if asked.
6. Click the

button in the

Internet Protocol (TCP/IP) Properties

window, and click the

button in the

Local Area Connection Properties

window.

7. Restart the computer if asked.

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the
Classic interface (where the icons and menus look like previous Windows versions), please follow the
instructions for Windows 2000.

1. Click

Start

and

Control Panel

2. Click the

Network and Internet Connections

icon and then the

Network Connections

icon.

3. Right-click the

Local Area Connection

that is associated with the Ethernet adapter you are using,

and select the

Properties

option.

4. In the

This connection uses the following items

box, highlight

Internet Protocol (TCP/IP)

, and click

the

Properties

button. Make sure that

Obtain an IP address automatically

and

Obtain DNS server

address automatically

are selected.

B. Open a command prompt.

•

For Windows 98 and Millennium, click

Start

and

Run

. In the

Open

field, type

command

. Press the

Enter

key or click the

button.

Summary of Contents for RVL200















































































































































































Search results

Summary of Contents for RVL200

Reviews:

Related manuals for RVL200

Brands by name

Popular brands

Linksys RVL200, User Manual

Search results

Summary of Contents for RVL200

Reviews:

Related manuals for RVL200

Brands by name

Popular brands