![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696021.webp)
8
Chapter 3: Getting to Know the Router
The Front Panel
4-Port SSL/IPSec VPN Router
Chapter 3: Getting to Know the Router
The Front Panel
The Router’s LEDs are located on the front panel of the Router.
LEDs
POWER
Green. The
POWER
LED lights up when the Router is powered on.
DIAG
Orange. The
DIAG
LED lights up when the Router is not ready. During a warm reset, it
flashes slowly, and during a reset to factory defaults, it flashes quickly. The LED turns
off when the Router is ready.
INTERNET
Green. The
INTERNET
LED lights up when the Router is connected to your cable or DSL
modem. It flashes when the Router is actively sending or receiving data through the
Internet port.
ETHERNET 1-4
Green. The
ETHERNET
LED serves two purposes. The LED lights up when the Router is
connected to a device through the corresponding port (1, 2, 3, or 4). The LED flashes
when the Router is actively sending or receiving data over that port.
Figure 3-1: Front Panel