89
Appendix A: Troubleshooting
Frequently Asked Questions
4-Port SSL/IPSec VPN Router
The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the
screen. What do I need to do?
Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your
Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s
Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at
www.linksys.com
for more information.
If all else fails in the installation, what can I do?
Reset the Router by holding down the Reset button for ten seconds. Reset your cable or DSL modem by powering
the unit off and then on. Obtain and flash the latest firmware release that is readily available on the Linksys
website,
www.linksys.com
.
How can I be notified of new Router firmware upgrades?
All Linksys firmware upgrades are posted on the Linksys website at
www.linksys.com
, where they can be
downloaded for free. The Router’s firmware can be upgraded using the Web-based Utility. If the Router’s Internet
connection is working well, there is no need to download a newer firmware version, unless that version contains
new features that you would like to use. Downloading a more current version of Router firmware will not enhance
the quality or speed of your Internet connection, and may disrupt your current connection stability.
Will the Router function in a Macintosh environment?
Yes, but the Router’s setup pages are accessible only through Internet Explorer 5.0 or Netscape Navigator 5.0 or
higher for Macintosh.
I am not able to get the web configuration screen for the Router. What can I do?
You may have to remove the proxy settings on your Internet browser, e.g., Netscape Navigator or Internet
Explorer. Or remove the dial-up settings on your browser. Check with your browser documentation, and make
sure that your browser is set to connect directly and that any dial-up is disabled. Make sure that your browser is
set to connect directly and that any dial-up is disabled. For Internet Explorer, click
Tools
,
Internet Options
, and
then the
Connection
tab. Make sure that Internet Explorer is set to
Never dial a connection
. For Netscape
Navigator, click
Edit
,
Preferences
,
Advanced
, and
Proxy
. Make sure that Netscape Navigator is set to
Direct
connection to the Internet
.
What is DMZ Hosting?
Demilitarized Zone (DMZ) allows one IP address (computer) to be exposed to the Internet. Some applications
require multiple TCP/IP ports to be open. It is recommended that you set your computer with a static IP if you
want to use DMZ Hosting. To get the LAN IP address, see “Appendix L: Finding the MAC Address and IP Address
for Your Ethernet Adapter.”
If DMZ Hosting is used, does the exposed user share the public IP with the Router?
No.
