Linksys RVL200 Page 56 User Manual Download

Page: 56 / 174

Chapter 5: Setting Up and Configuring the Router
Port Management Tab - VLAN Membership

4-Port SSL/IPSec VPN Router

Port Management Tab - VLAN Membership

Use this screen to define the members of a VLAN.

VLAN Membership

VLAN ID. Select the VLAN ID number that you configured on the

Create VLAN

screen.

Description. Enter the VLAN group name in this field. You can use up to 50 characters.

For the default VLAN 1, all ports will be set to Access mode and all frames will be UnTagged.

For the Router’s four ports, select the appropriate mode:

Access. If you select this mode, the port can be UnTagged or Excluded.

Trunk. If you select this mode, the port can be Tagged, UnTagged, or Excluded.

General. If you select this mode, the port can be Tagged, UnTagged, or Excluded.

If you select Excluded for a specific port, then the port will be excluded from the selected VLAN.

Port VLAN Summary

Port ID. The Router’s LAN ports are listed in this column.

Action VLAN ID. The Tagged (T) or UnTagged (U) status for each port and VLAN ID is displayed in this column.

Click the

Save Settings

button to save your changes, or click the

Cancel Changes

button to undo your changes.

Figure 5-40: Port Management Tab - VLAN Membership

Summary of Contents for RVL200















































































































































































Search results

Summary of Contents for RVL200

Reviews:

Related manuals for RVL200

Brands by name

Popular brands

Linksys RVL200, User Manual

Search results

Summary of Contents for RVL200

Reviews:

Related manuals for RVL200

Brands by name

Popular brands