![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696144.webp)
131
Appendix J: Configuring a Gateway-to-Gateway IPSec Tunnel
Overview
4-Port SSL/IPSec VPN Router
Appendix J: Configuring a Gateway-to-Gateway IPSec Tunnel
Overview
This appendix explains how to configure an IPSec VPN tunnel between two VPN Routers by example. Two PCs are
used to test the liveliness of the tunnel.
Before You Begin
The following is a list of equipment you need:
•
Two Windows desktop PCs (each PC will be connected to a VPN Router)
•
Two VPN Routers (4-Port SSL/IPSec VPN Router, model number: RVL200, and 10/100 8-Port VPN Router,
model number: RV082) that are both connected to the Internet
Configuring the VPN Settings when the Remote Gateway Uses a Static IP
This example assumes the Remote Gateway is using a static IP address. If the Remote Gateway uses a dynamic
IP address, refer to “Configuring the VPN Settings when the Remote Gateway Uses a Dynamic IP.”
Figure J-1: Gateway-to-Gateway IPSec VPN Tunnel - Remote Gateway Using Static IP
NOTE:
Each computer must have a network
adapter installed.
RVL200
WAN: A.A.A.A
LAN: 192.168.5.1
RV082
WAN: B.B.B.B
LAN: 192.168.1.1