2
Chapter 1: Introduction
What’s in this Guide?
4-Port SSL/IPSec VPN Router
•
Appendix A: Troubleshooting
This appendix describes some problems and solutions, as well as frequently asked questions, regarding
installation and use of the Router.
•
Appendix B: Physical Setup of the Router
This appendix describes the physical setup of the Router.
•
Appendix C: Using the Virtual Passage SSL VPN Client
This appendix explains how to install and use the Virtual Passage Client for remote access of your network.
•
Appendix D: Configuring Bandwidth Management
This appendix describes an example of configuring Bandwidth Management - Rate Control for Voice over
Internet Protocol (VoIP) service.
•
Appendix E: Configuring an Active Directory Server
This appendix provides instructions on how to configure an Active Directory server through the Configure Your
Server Wizard in Windows.
•
Appendix F: Adding a User for the Active Directory Server
This appendix explains how to create a user for Active Directory.
•
Appendix G: Installing an Internet Authentication Service (IAS) Server
This appendix provides instructions on how to install an IAS server.
•
Appendix H: Configuring the Router’s Settings for a Lightweight Directory Access Protocol (LDAP) Server
This appendix describes how to configure the Router’s LDAP server settings.
•
Appendix I: Deploying the 4-Port SSL/IPSec VPN Router in an Existing Network
This appendix provides instructions on how to add the 4-Port SSL/IPSec VPN Router to a network with an
existing VPN Router.
•
Appendix J: Configuring a Gateway-to-Gateway IPSec Tunnel
This appendix explains how to set up an IPSec VPN tunnel between two VPN Routers.
•
Appendix K: Configuring NAT Traversal
This appendix shows an example of configuring NAT traversal between an initiator and a responder.
•
Appendix L: Finding the MAC Address and IP Address for Your Ethernet Adapter
This appendix describes how to find the MAC address for your computer’s Ethernet adapter so you can use
the MAC address cloning feature of the Router.
