![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696058.webp)
45
Chapter 5: Setting Up and Configuring the Router
QoS Tab - Bandwidth Management
4-Port SSL/IPSec VPN Router
3. On the
Bandwidth Management
screen, enter the IP address or range you need to control. To include all
internal IP addresses, keep the default,
0
.
4. From the
Direction
drop-down menu, select
Upstream
for outbound traffic, or select
Downstream
for
inbound traffic.
5. In the
Min. Rate
field, enter the minimum rate for the guaranteed bandwidth.
6. In the
Max. Rate
field, enter the maximum rate for the maximum bandwidth.
7. Click the
Enable
checkbox to enable this rule.
8. After you have set up the rule, click the
Add to list
button.
9. Repeat steps 1-8 for additional rules. You can have up to 100 rules.
Delete selected application. To delete a rule, select it and click the
Delete selected application
button.
Click the
Summary
button to view a summary of the Rate Control rules. To change a rule, click its
Edit
button. To
update the list, click the
Refresh
button. To return to the
Bandwidth Management
screen, click the
Close
button.
Click the
Save Settings
button to save your changes, or click the
Cancel Changes
button to undo your changes.
Priority
The Router offers three levels of priority: High, Middle, and Low.
1. Select the Service you want from the pull-down menu.
2. If the Service you need is not listed in the menu, click the
Service Management
button to add the new
service. The
Service Management
screen will appear. Enter a name in the
Service Name
field. From the
Protocol
drop-down menu, select the protocol it uses. Enter its range in the
Port Range
fields. Click the
Add
to List
button. Click the
Apply
button to save your changes, or click the
Cancel
button to cancel your
changes. Click the
Exit
button to return to the
Bandwidth Management
screen.
If you want to modify a service you have created, select it and click the
Update this service
button. Then,
make changes. Click the
Apply
button to save your changes, or click the
Cancel
button to cancel your
changes. Click the
Exit
button to return to the
Bandwidth Management
screen.
If you want to delete a service you have created, select it and click the
Delete selected service
button. Click
the
Apply
button to save your changes, or click the
Cancel
button to cancel your changes. Click the
Exit
button to return to the
Bandwidth Management
screen.
Figure 5-43: Bandwidth Management - Summary
Figure 5-44: Bandwidth Management - Priority