39
Chapter 5: Setting Up and Configuring the Router
Port Management Tab - Port Setup
4-Port SSL/IPSec VPN Router
Port Management Tab - Port Setup
On this screen you can configure the connection settings for each local port, such as priority, speed, and duplex.
You can also enable or disable the auto-negotiation feature for all ports.
Basic Per Port Config.
The Basic Per Port Config. table will display the LAN port numbers and Internet port in the Port ID column and
their respective settings in the Interface, Disable, Speed, and Duplex columns. Click
Enable
in the Auto
Negotiation column if you want the Router’s ports to auto-negotiate connection speeds and duplex mode; then
you will not need to set up speed and duplex settings separately.
Port ID. The port number or name is displayed.
Interface. The port’s interface type, LAN or WAN, is shown here.
Disable. You can select specific ports to disable. Click the checkbox to disable a specific port.
Speed. You can manually configure each port’s speed as 10Mbps or 100Mbps.
Duplex. You can manually configure each port’s duplex mode as half-duplex or full-duplex.
Auto Negotiation. You can set each port to auto-negotiation mode, so you will not need to set up speed and duplex
settings separately.
Click the
Save Settings
button to save your changes, or click the
Cancel Changes
button to undo your changes.
Figure 5-36: Port Management Tab - Port Setup
