manualshive.com logo in svg

Linksys RVL200, User Manual, Page: 73 / 174

Share
Download
Linksys RVL200 User Manual Download Page 73

60

Chapter 5: Setting Up and Configuring the Router
IPSec VPN Tab - VPN Pass Through

4-Port SSL/IPSec VPN Router

IPSec VPN Tab - VPN Pass Through 

The

 VPN Pass Through 

screen allows you to enable or disable passthrough for a variety of VPN methods. 

VPN Pass Through

IPSec Pass Through. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange 
of packets at the IP layer. IPSec Pass Through is enabled by default to allow IPSec tunnels to pass through the 
Router.

PPTP Pass Through. Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be 
tunneled through an IP network. PPTP Pass Through is enabled by default.

L2TP Pass Through. Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions via the 
Internet on the Layer 2 level. L2TP Pass Through is enabled by default. 

Click the 

Save Settings

 button to save your changes, or click the 

Cancel Changes

 button to undo the changes. 

Figure 5-57: IPSec VPN Tab - VPN Pass Through

Summary of Contents for RVL200















































































































































































Reviews:

No comments