Lighthouse a125 Installation And Operation Instructions Manual Download Page 223

Page: 223 / 460

3. Once the reason for the caution has been

identified you can manipulate the route by moving
the caution waypoints so that the caution area
is avoided.

Important: Autorouting

will NOT be used when

moving waypoints within routes, extra care should
be taken to ensure that the route leg and any
moved waypoints are safe to navigate.

4. Scroll over the entire route to identify any other

areas that might be of concern, that were not
highlighted during

Autorouting

Waypoints, Routes and Tracks

223

Summary of Contents for a125













































































































































































































































































































































































































































































Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands

Lighthouse a125, Installation And Operation Instructions Manual

Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands