Lighthouse a125, Installation And Operation Instructions Manual

Page: 130 / 460

8.7 Resetting your system
Your system may be reset to its factory default
settings if required.
There are 2 types of reset operation, both of which
affect the current display you are using, AND any
networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and
databar settings to factory default. It will NOT affect
your waypoints, routes, or tracks data.
Settings and data reset
In addition to the settings reset detailed above,
performing a settings and data reset will also remove
ALL waypoints, routes, and tracks data.
Resetting system settings
With the homescreen displayed:
1. Select
Set-up .
2. Select Maintenance .
3. Select System Settings Reset .
A message is displayed prompting you to confirm
the action.
4. Select Yes to proceed with the settings reset, or
No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases
ALL waypoints, routes, and track data from your
system. BEFORE proceeding with a settings and
data reset, ensure that you backup any data that
you want to keep on to a memory card.
With the homescreen displayed:
1. Select
Set-up .
2. Select Maintenance .
3. Select System Settings and Data Reset .
A message is displayed prompting you to confirm
the action.
4. Select Yes to proceed with the settings and data
reset, or No to cancel.
130 a Series / c Series / e Series