Lighthouse a125 Installation And Operation Instructions Manual Download Page 162

Page: 162 / 460

• The find tool bar is displayed.

• The first occurrence of the keyword is

highlighted.

5. Move the

Joystick Down

to go to the next

occurrence of the keyword, or

6. Move the

Joystick Up

to go to the previous

occurrence of the keyword.

7. You can press the

Back

button at any time to

close the find tool bar and return to the normal
viewing.

Keyword not found

The document viewer will let you know if the keyword
you have searched for does not appear in the
document.

If the keyword is not found then the find tool bar will
display an exclamation mark and a pop-up message
is displayed on-screen.

Selecting

New Search

will take you back to the

on-screen keyboard so that you can try a different
keyword. Selecting

Cancel

will close the find tool

bar and resume normal operation.

162

a Series / c Series / e Series

Summary of Contents for a125













































































































































































































































































































































































































































































Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands

Lighthouse a125, Installation And Operation Instructions Manual

Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands