Lighthouse a125 Installation And Operation Instructions Manual Download Page 135

Page: 135 / 460

9.4 Time and Date set-up

You can specify your preference for the way that time and date will appear in all applications.

Menu item

Description

Options

Date Format

Allows you to specify the preferred format for the
display of date information in all applications.

• MM:DD:YY (Month, Day, Year)

• DD:MM:YY (Day, Month, Year)

Time Format

Allows you to specify the preferred format for the
display of time information in all applications.

• 12hr

• 24hr

Local Time: UTC

Allows you to specify the local time zone that will
be used, in terms of an offset from UTC (Universal
Coordinated Time), in 0.5 hour increments.

• –13 to +13 hours (in 0.5 hour

increments)

Customizing your display

135

Summary of Contents for a125













































































































































































































































































































































































































































































Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands

Lighthouse a125, Installation And Operation Instructions Manual

Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands