Chapter 4 Performance specification
4-16
Select the slot No. of computer link module and the channel of operation to switch over in the dialog box for
operation change and click on [Run] button to start the correspondent channel.
In these methods, run the correspondent channel to start operation after basic parameters are set and written
according to channels RS-232C/RS-422.
4.3.3 Reading setting values
Basic parameters saved in flash memory of Cnet I/F module can be confirmed by reading through Frame Editor or
checking through LED display.
How to read basic parameters through Frame Editor is specified as follows.(refer to ‘Appendix A, LED indication
specification’ for checking through LED display.)
1)
Select [Online]-[Connect] in basic screen of Frame Editor to finish the connection with PLC. How to connect is
same as in 4.3.2.
2)
Select [Online]-[Read] to display the dialog box below if the connection has been completed.
Enter Cnet’s slot No., communication type and communication option herein and then select [Read].
If reading is finished, the basic values which have been read are displayed in basic screen of Frame Editor and
can be saved in a file.