Chapter 8 Exercising program
8-24
E) If COM port of modem is incorrectly set or connection with modem is abnormal, the following error message is
displayed. In this case, inspect COM port or modem connection.
F) If telephoning is completed, GMWIN tries remote connection automatically and if remote connection is
completed, program write and run/stop icon menus are activated as below.
G) This means that remote 1 stage connection is completed just like the connection status that RS-232C cable is
connected as moved, where all functions in On-line menu are available.
H) To release connection in remote connection status, select Disconnect in On-line menu to display Disconnect
menu box as in the figure below indicating Disconnected.
I) If connection is released, GMWIN hangs up the phone automatically to disconnect it.
J) If the phone is hung up normally, local and remote modem is restored to initial status to allow remote
connection again via telephoning.