manualshive.com logo in svg

Lexus ES350, Manual, Page: 826 / 917

Share
Download
Lexus ES350 Manual Download Page 826

825

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

7

When trouble 

ari

ses

The coolant level is satisfactory if it is between the “FULL” and
“LOW” line on the reservoir.

Reservoir
“FULL”
“LOW”
Radiator cap

Add coolant if necessary.

Water can be used in an emer-
gency if coolant is unavailable.

Start the hybrid system and turn the air conditioning system on to
check that the radiator cooling fans operate and to check for coolant
leaks from the radiator or hoses.

The fans operate when the air conditioning system is turned on immediately
after a cold start. Confirm that the fans are operating by checking the fan
sound and air flow. If it is difficult to check these, turn the air conditioning sys-
tem on and off repeatedly. (The fans may not operate in freezing tempera-
tures.)

If the fans are not operating:
Stop the hybrid system immediately and contact your Lexus dealer.
If the fans are operating:
Have the vehicle inspected at the nearest Lexus dealer.

4

1

2

3

4

5

6

7

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments