manualshive.com logo in svg

Lexus ES350, Manual, Page: 225 / 917

Share
Download
Lexus ES350 Manual Download Page 225

225

ES350_300h_OM_OM33A60U_(U)

4-2. Driving procedures

4

Dr

iving

Turn signal lever

Right turn
Lane change to the right (move
the lever partway and then
release it)

The right hand signals will flash 3
times.

Lane change to the left (move the
lever partway and then release it)

The left hand signals will flash 3 times.

Left turn

■

Turn signals can be operated when

The “START STOP ENGINE” <“POWER”> switch is in IGNITION ON <ON>
mode.

■

If the indicator flashes faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned out.

■

If the turn signals stop flashing before a lane change has been performed

Operate the lever again.

■

To discontinue flashing of the turn signals during a lane change

Operate the lever in the opposite direction.

■

Customization

The number of times the turn signals flash during a lane change can be changed. 
(

P. 862)

Operating instructions

1

2

3

4

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments