manualshive.com logo in svg

Lexus ES350, Manual, Page: 817 / 917

Share
Download
Lexus ES350 Manual Download Page 817

816

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

CAUTION

■

12-volt battery precautions

The 12-volt battery contains poisonous and corrosive acidic electrolyte, while
related parts contain lead and lead compounds. Observe the following precau-
tions when handling the 12-volt battery:

●

When working with the 12-volt battery, always wear safety glasses and take care
not to allow any battery fluids (acid) to come into contact with skin, clothing or the
vehicle body.

●

Do not lean over the 12-volt battery.

●

In the event that battery fluid comes into contact with the skin or eyes, immedi-
ately wash the affected area with water and seek medical attention.
Place a wet sponge or cloth over the affected area until medical attention can be
received.

●

Always wash your hands after handling the battery support, terminals, and other
battery-related parts.

●

Do not allow children near the 12-volt battery.

NOTICE

■

When handling jumper cables

When connecting the jumper cables, ensure that they do not become entangled in
the cooling fans or engine drive belt.

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments