Lexus ES350 Manual Download Page 53

Page: 53 / 917

1-1. For safe use

ES350_300h_OM_OM33A60U_(U)

For safety

and security

■

There is a malfunction in the system

: The system judges a person of adult size as an adult. When a smaller adult sits

in the front passenger seat, the system may not recognize him/her as an adult
depending on his/her physique and posture.

: In the event the front passenger does not wear a seat belt

: For some children, child in seat, child in booster seat or child in convertible

seat, the system may not recognize him/her as a child. Factors which may
affect this can be the physique or posture.

: Never install a rear-facing child restraint system on the front passenger seat. A

forward-facing child restraint system should only be installed on the front pas-
senger seat when it is unavoidable. (



P. 57)

: In case the indicator light is not illuminated, consult this manual on how to

install the child restraint system properly. (



P. 61)

Indicator/

warning light

“AIR BAG ON” and “AIR BAG OFF”

indicator lights

“AIR BAG OFF”

SRS warning light

Seat belt reminder light

Off

Devices

Front passenger airbag

Deactivated

Side airbag

on the front passenger seat

Activated

Curtain shield airbag

in the front passenger side

Front passenger knee airbag

Deactivated

Front passenger’s seat belt pretensioner

Activated

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 53 / 917

Search results

Summary of Contents for ES350

Reviews: