manualshive.com logo in svg

Lexus ES350, Manual, Page: 332 / 917

Share
Download
Lexus ES350 Manual Download Page 332

332

ES350_300h_OM_OM33A60U_(U)

4-6. Driving tips

Use the correct tire chain size when mounting the tire chains. 
Chain size is regulated for each tire size.

Side chain
0.12 in. (3 mm) in diameter
0.39 in. (10 mm) in width
1.18 in. (30 mm) in length

Cross chain
0.16 in. (4 mm) in diameter
0.55 in. (14 mm) in width
0.98 in. (25 mm) in length

Regulations regarding the use of tire chains vary depending on location
and type of road. Always check local regulations before installing chains.

■

Tire chain installation

Observe the following precautions when installing and removing chains:

●

Install and remove tire chains in a safe location.

●

Install tire chains on the front tires. Do not install tire chains on the rear tires.

●

Install tire chains on front tires as tightly as possible. Retighten chains after driving
1/4 

 1/2 mile (0.5 

 1.0 km).

●

Install tire chains following the instructions provided with the tire chains.

Selecting tire chains

1

2

3

4

5

6

Regulations on the use of tire chains

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments