Lexus ES350 Manual Download Page 165

Page: 165 / 917

ES350_300h_OM_OM33A60U_(U)

165

3-3. Adjusting the seats

Op
era
tio

n of
ea

CAUTION

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to do so
may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure they are
locked in position.

●

Do not drive with the head restraints removed.

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 165 / 917

Search results

Summary of Contents for ES350

Reviews: