manualshive.com logo in svg

Lexus ES350, Manual, Page: 630 / 917

Share
Download
Lexus ES350 Manual Download Page 630

ES350_300h_OM_OM33A60U_(U)

629

5-7. Other interior features

5

Inte
rior fe

ature

s

CAUTION

■

Burns

●

Use caution when seating the following persons in a seat with the seat heater on
to avoid the possibility of burns:
• Babies, small children, the elderly, the sick and the physically challenged
• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping drugs,

cold remedies, etc.)

●

Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the
seat and may lead to overheating.

●

Do not use seat heater more than necessary. Doing so may cause minor burns or
overheating.

NOTICE

■

To prevent damage to the seat heaters/seat ventilators

Do not put heavy objects that have an uneven surface on the seat and do not stick
sharp objects (needles, nails, etc.) into the seat.

■

To prevent 12-volt battery discharge

Turn the seat heaters/seat ventilators off when the engine is not running <hybrid
system is not operating>.

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments