manualshive.com logo in svg

Lexus ES350, Manual, Page: 785 / 917

Share
Download
Lexus ES350 Manual Download Page 785

784

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

*

: Refer to the separate “Scheduled Maintenance” or “Owner’s Manual Supple-

ment” for the maintenance interval applicable to your vehicle.

Warning message

Details

Correction procedure

Indicates that the tire
position information can-
not be recognized

Drive for a short while
and check if the display
updates.

If the radio wave condi-
tions improve, the dis-
play may return to
normal. If the tire pres-
sure is still not dis-
played after driving for
several minutes, stop
the vehicle in a safe
place, turn the “START
STOP ENGINE”
<“POWER”> switch off
then on again, and start
driving. 
If the tire pressure is still
not displayed even
after repeating this sev-
eral times, have the
vehicle inspected at
your Lexus dealer.

Indicates that the pre-col-
lision system is not cur-
rently functional because
the grille cover or the
sensor is dirty

This message also
appears when the pre-
collision system is not
functional due to over-
heating.

• Check the grille cover

and the sensor and
clean them if they are
dirty.

• In case of overheating,

the system will become
functional once the sys-
tem cools down.

(Flashes)

(If equipped)

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments