Lexus ES350 Manual Download Page 449

Page: 449 / 917

ES350_300h_OM_OM33A60U_(U)

449

5-3. Using the Lexus Display Audio system

Inte
rior fe

ature

Press

when the audio system is turned on. The audio source

changes as follows each time

is pressed. If no discs are inserted in

the player, or if the external device is not connected, that mode will be
skipped.



SAT



CD player



iPod or USB memory



Bluetooth

audio



AUX



Press

to increase the volume and

to decrease the volume.

Hold the button in that position to continue increasing or decreasing the volume.

Press and hold

To cancel, press and hold

Press

to select the radio mode.

Press

to select a radio station.

To seek stations, press and hold

until you hear a beep.

To cancel, press either switch.

Changing the audio source

Adjusting the volume

Silencing a sound

Selecting a radio station

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 449 / 917

Search results

Summary of Contents for ES350

Reviews: