manualshive.com logo in svg

Lexus ES350, Manual, Page: 250 / 917

Share
Download
Lexus ES350 Manual Download Page 250

250

ES350_300h_OM_OM33A60U_(U)

4-5. Using the driving support systems

■

Cruise control can be set when

●

The shift lever is in D or range S4 or higher of S has been selected.

●

Vehicle speed is above approximately 25 mph (40 km/h).

■

Accelerating after setting the vehicle speed

●

The vehicle can be accelerated normally. After acceleration, the set speed
resumes.

●

Even without canceling the cruise control, the set speed can be increased by first
accelerating the vehicle to the desired speed and then pushing the lever down to
set the new speed.

■

Automatic cruise control cancelation

Cruise control will stop maintaining the vehicle speed in any of the following situa-
tions. 

●

Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the
preset vehicle speed.
At this time, the memorized set speed is not retained.

●

Actual vehicle speed is below approximately 25 mph (40 km/h).

●

VSC is activated.

■

If the warning message for the cruise control is shown on the multi-information dis-
play

Press the “ON/OFF” button once to deactivate the system, and then press the but-
ton again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels immediately
after being activated, there may be a malfunction in the cruise control system. Have
the vehicle inspected by your Lexus dealer. 

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments