Home
/
Lexus
/
ES350
/
Manual

Lexus ES350, Manual, Page: 206 / 917

Share

Page: 206 / 917

Lexus ES350 Manual Download Page 206

206

ES350_300h_OM_OM33A60U_(U)

4-2. Driving procedures

CAUTION

■

When starting the engine

Always start the engine while sitting in the driver’s seat. Do not depress the accel-
erator pedal while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.

■

Caution while driving

If engine failure occurs while the vehicle is moving, do not lock or open the doors
until the vehicle reaches a safe and complete stop. Activation of the steering lock in
this circumstance may lead to an accident, resulting in death or serious injury.

■

Stopping the engine in an emergency

If you want to stop the engine in an emergency while driving the vehicle, press and
hold the “START STOP ENGINE” switch for more than 2 seconds, or press it
briefly 3 times or more in succession. (



P. 749)

However, do not touch the “START STOP ENGINE” switch while driving except in
an emergency. Turning the engine off while driving will not cause loss of steering or
braking control, but the power assist to these systems will be lost. This will make it
more difficult to steer and brake, so you should pull over and stop the vehicle as
soon as it is safe to do so.

«
...
204
205
206
207
208
...
»

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments