manualshive.com logo in svg

Lexus ES350, Manual, Page: 781 / 917

Share
Download
Lexus ES350 Manual Download Page 781

780

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

Indicates that the Blind
Spot Monitor sensors or
the surrounding area on
the bumper is dirty or
covered with ice

Clean the sensor and its
surrounding area on the
bumper.

Indicates that the hybrid
system has overheated

This message may be
displayed when driving
under severe operating
conditions. (For exam-
ple, when driving up a
long steep hill.)

Stop and check. 
(

P. 824)

Indicates that remaining
fuel is approximately 2.6
gal. (9.7 L, 2.1 Imp.gal.) or
less

Refuel the vehicle.

Indicates that the “START
STOP ENGINE”
<“POWER”> switch is
turned off or turned to
ACCESSORY mode and
the driver’s door is
opened while the lights
are turned on

Turn the lights off.

Indicates that the driver’s
door was opened with the
shift position in any posi-
tion other than P

Shift the shift position to P.

Warning message

Details

Correction procedure

(If equipped)

(Hybrid vehicles)

(Flashes)

(Flashes)

(Hybrid vehicles)

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments