Lexus ES350 Manual Download Page 799

Page: 799 / 917

798

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

Raise the vehicle until the tire is
slightly raised off the ground.

Remove all the wheel nuts and
the tire.

When resting the tire on the ground,
place the tire so that the wheel design
faces up to avoid scratching the wheel
surface.

Vehicles with a full-size spare tire:
Remove the wheel ornament by
pushing from the reverse side.

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 799 / 917

Search results

Summary of Contents for ES350

Reviews: