manualshive.com logo in svg

Lexus ES350, Manual, Page: 763 / 917

Share
Download
Lexus ES350 Manual Download Page 763

762

7-2. Steps to take in an emergency

ES350_300h_OM_OM33A60U_(U)

After taking the specified steps to correct the suspected problem, check
that the warning light goes off.

Follow the correction procedures.

Warning light

Warning light/Details

Correction procedure

Open door warning light
(warning buzzer)

*

1

Indicates that a door or the
trunk is not fully closed

Check that all the doors and
the trunk are closed.

Low fuel level warning light

Indicates remaining fuel is
approximately 2.6 gal. (9.7 L,
2.1 Imp.gal.)

Refuel the vehicle.

Seat belt reminder light (warn-
ing buzzer)

*

2

Warns the driver and/or front
passenger to fasten their seat
belts

Fasten the seat belt.

If the front passenger’s seat is
occupied, the front passen-
ger’s seat belt also needs to
be fastened to make the
warning light (warning
buzzer) off.

Master warning light

A buzzer sounds and the
warning light comes on and
flashes to indicate that the
master warning system has
detected a malfunction.

P. 769

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments