manualshive.com logo in svg

Lexus ES350, Manual, Page: 261 / 917

Share
Download
Lexus ES350 Manual Download Page 261

ES350_300h_OM_OM33A60U_(U)

261

4-5. Using the driving support systems

4

Dr

iving

■

Automatic cancelation of constant speed control

The cruise control will stop maintaining the vehicle speed in the following situations:

●

Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set
vehicle speed.
At this time, the memorized set speed is not retained.

●

Vehicle speed falls below approximately 25 mph (40 km/h).

●

VSC is activated.

■

Radar sensor and grille cover

Always keep the sensor and grille cover clean to ensure that the vehicle-to-vehicle
distance control operates properly. (Some obstructions, such as snow, ice and plastic
objects, cannot be detected by the obstruction sensor.)
Dynamic radar cruise control is canceled if an obstruction is detected. 

■

Warning messages and buzzers for dynamic radar cruise control

Warning messages and buzzers are used to indicate a system malfunction or to
inform the driver of the need for caution while driving. (

P. 771)

Grille cover
Radar sensor

1

2

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments