Lexus ES350 Manual Download Page 249

Page: 249 / 917

ES350_300h_OM_OM33A60U_(U)

249

4-5. Using the driving support systems

iving

To change the set speed, operate the lever until the desired set speed is
obtained.

Increases the speed
Decreases the speed

Fine adjustment: Momentarily move
the lever in the desired direction.

Large adjustment: Hold the lever in
the desired direction.

The set speed will be increased or decreased as follows:

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is oper-
ated.

Large adjustment: The set speed can be increased or decreased continually until
the lever is released.

Pulling the lever toward you can-
cels the constant speed control.

The speed setting is also canceled
when the brakes are applied.

Pushing the lever up resumes the
constant speed control.

Resuming is available when the vehi-
cle speed is more than approximately
25 mph (40 km/h).

Adjusting the set speed

Canceling and resuming the constant speed control

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 249 / 917

Search results

Summary of Contents for ES350

Reviews: