Lexus ES350 Manual Download Page 304

Page: 304 / 917

304

ES350_300h_OM_OM33A60U_(U)

4-5. Using the driving support systems

If the vehicle gets stuck in mud, dirt or snow, the TRAC system may
reduce power from the engine <hybrid system> to the wheels. Pressing

to turn the system off may make it easier for you to rock the vehi-

cle in order to free it.
To turn the TRAC system off, quickly

press and release

The “TRAC OFF” will be shown on the
multi-information display. Press

again to turn the system back

on.

■

Turning off both TRAC and VSC systems

To turn the TRAC and VSC systems off, press and hold

for more than 3 sec-

onds while the vehicle is stopped.
The VSC OFF indicator light will come on and the “TRAC OFF” will be shown on the
multi-information display.

Press

again to turn the systems back on.

Disabling the TRAC system

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES350

Reviews:

Lexus ES350, Manual, Page: 304 / 917

Search results

Summary of Contents for ES350

Reviews: