manualshive.com logo in svg

Lexus ES350, Manual, Page: 202 / 917

Share
Download
Lexus ES350 Manual Download Page 202

202

ES350_300h_OM_OM33A60U_(U)

4-2. Driving procedures

Stop the vehicle.
Shift the shift lever to P.
Set the parking brake. (

P. 226)

Press the “START STOP ENGINE” switch.
Release the brake pedal and check that “POWER ON” on the multi-
information display is off.

Modes can be changed by pressing the “START STOP ENGINE” switch
with brake pedal released. (The mode changes each time the switch is
pressed.)
Off*

The emergency flashers can be used.

The multi-information display will not
be displayed.

ACCESSORY mode

Some electrical components such as
the audio system can be used.

“POWER ON” will be displayed on
the multi-information display.

IGNITION ON mode

All electrical components can be
used.

“POWER ON” will be displayed on
the multi-information display.

*

: If the shift lever is in a position other

than P when turning off the engine, the
“START STOP ENGINE” switch will
be turned to ACCESSORY mode,
not to off.

Stopping the engine

Changing “START STOP ENGINE” switch modes

1

2

3

4

5

Summary of Contents for ES350






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments