Lexmark T63 Series, Service Manual

Page: 57 / 345

Diagnostic information
2-23
4060- xxx
Install Tray x
or Cancel Job
Tray x =Tray 2, Tray 3, Tray 4, Tray 5.
This message is displayed when a paper handling
option has been hot unplugged. The printer requires
the reinstallation of the option to print a page which
has been formatted by the interpreter before the option
was removed.
The following actions may be taken:
• Install the option.
• Press
Menu until Busy/Waiting displays. Select
one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to “Input tray(s)
service check” on page 2-64 .
Load Staples This message displays when the Staples Empty Alarm
is activated and one of the following occurs:
• There are no staples in the stapler.
• The maximum number of staples have been fired
after the engine has reported that the staple
cartridge is low.
• The printer does not detect the staple cartridge is
present.
The following actions may be taken:
• Install a new staple cartridge to clear this message
and select Start or Continue to resume printing
the staple job.
• Choose to ignore the Load Staples message for
this print job by pressing Go or Select . The printer
starts or resumes printing, but does not staple the
rest of the job.
• Press Menu until Busy/Waiting displays. The
following actions may be available:
- Cancel Job
- Reset Printer
- Reset Active Bin
Priming Failed
Retry. Go/Stop? This message displays when an error has occurred
during the staple priming operation. This message not
only notifies the user that a specific error interfered
with the priming, but allows the user to request the
process begin again.
The following actions are available:
• Press Go to restart the priming operation.
• Press Return or Stop to cancel the priming
operation.
User attendance messages (continued)
Primary message Secondary message Explanation