Lexmark M5163dn User Manual Download

Page: 194 / 253

•

Make sure the Serial Buffer menu is set to Enabled.

Some held jobs were not restored

From the printer control panel, select

Continue

to clear the message and continue printing.

Note:

Held jobs that are not restored remain in the printer hard disk and are inaccessible.

Standard network software error [54]

Try one or more of the following:

•

From the printer control panel, press

to confirm.

•

Unplug the router, wait for 30 seconds, and then plug it back again.

•

Turn off the printer, and then turn it back on.

•

Update the network firmware in the printer or the print server. For more information, visit the Lexmark support
Web site at

http://support.lexmark.com

Standard USB port disabled [56]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

Note:

The printer discards any data received through the USB port.

•

From the printer control panel, set USB Buffer to Auto.

Supply needed to complete job

Try one or more of the following:

•

From the printer control panel, select

Prompt for supplies

to view all error messages that indicate what supplies

are needed to continue processing the current job, and then press

to clear the message and continue printing.

Order the missing supply immediately.

Install the supply. For more information, see the instruction sheet that came with the supply.

•

Cancel the print job, then install the missing supply, and then resend the print job.

Too many bins attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra bins.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Troubleshooting

194

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands