Lexmark M5163dn User Manual Download

Page: 190 / 253

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

•

Remove the specified bin:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the specified bin.

Contact customer support.

•

From the printer control panel, press

to clear the message and print without using the specified bin.

Reattach bins [x] – [y]

Try one or more of the following:

•

Turn off the printer, and then turn it back on.

•

Reattach the specified bins:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the specified bins.

Reattach the bins.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

•

Remove the specified bins:

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the specified bins.

Contact customer support.

From the printer control panel, press

to clear the message and print without using the specified bins.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

•

Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the

User’s Guide

•

If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Note:

If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner

cartridge.

Troubleshooting

190

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands