Lexmark M5163dn User Manual Download

Page: 88 / 253

Use

Heavy Loading

Duplex
Off

Determine and set two-sided printing for all print jobs with Heavy as
the paper type.

Rough/Cotton Loading

Duplex
Off

Determine and set two-sided printing for all print jobs with Rough or
Cotton as the paper type.

Custom [x] Loading

Duplex
Off

Determine and set two-sided printing for all print jobs with Custom [x]
as the paper type.

Note:

Custom [x] Loading is available only when the custom type is

supported.

Notes:

•

Off is the factory default setting for all Paper Loading menu selections.

•

Duplex sets the printer default to two

‑

sided printing for every print job unless one

‑

sided printing is selected from

Print Properties or the print dialog, depending on your operating system.

Custom Types menu

Use

Custom Type [x]

Paper
Card Stock
Transparency
Rough/Cotton
Labels
Vinyl Labels
Envelope

Associate a paper or specialty media type with a factory default custom type
name or a user

‑

defined custom name created from the Embedded Web Server

or from MarkVision

Professional.

Notes:

•

Paper is the factory default setting.

•

The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.

Recycled

Paper
Card Stock
Transparency
Rough/Cotton
Labels
Vinyl Labels
Envelope

Specify a paper type when Recycled is selected in other menus.

Notes:

•

Paper is the factory default setting.

•

The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.

Understanding the printer menus

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands